Ga door naar hoofdinhoud

Fix Your Stuff

Right to Repair

Parts & Tools

Inleiding

This guide demonstrates how to remove and replace the battery pack.

  1. Turn the camera with the bottom side facing up. Locate the panel labeled "Batt. Open"
    • Turn the camera with the bottom side facing up.

    • Locate the panel labeled "Batt. Open"

    • Place your finger on the panel and slide it in the direction of the arrow.

    • The slot will swing open revealing the battery pack.

  2. Rotate the camera so that the slot is horizontal.
    • Rotate the camera so that the slot is horizontal.

    • Pull the orange lever and the battery will spring out slightly.

  3. Grasp battery and fully pull out of slot
    • Grasp battery and fully pull out of slot

    • When placing the new battery back in the slot, the arrow on the battery must align with the arrow on the camera.

Conclusie

After a new battery has been inserted, close the swinging door and you're done.

Randy Lormand

Lid sinds: 23-01-11

331 Reputatie

3 handleidingen geschreven

Team

Cal Poly, Team 11-27, Maness Winter 2011 Lid van Cal Poly, Team 11-27, Maness Winter 2011

CPSU-MANESS-W11S11G27

4 Leden

7 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 1,370