Inleiding
The Canon PowerShot Elph 310 HS may have issues with the shutter button sticking. Replacing the button should only take a few minutes with these steps.
Wat je nodig hebt
-
-
-
Use the Phillips #000 screwdriver from the iFixit tool kit to unscrew the two image stabilizer panel’s 2 mm Phillips head screws.
-
Using your hands, remove the image stabilizer panel.
Vraag FixBot
-
-
-
Unscrew the two 4 mm Phillips head screws from the bottom side of the camera.
-
-
-
Using your hand, open the battery portal located on the bottom left of the camera. The screw is in the bottom left of the battery portal.
-
Unscrew the hidden 4mm Phillips head screw inside the battery portal.
-
-
-
-
Remove the HDMI side panel with your hands.
-
Unscrew the four 4 mm Phillips head screws from the inside of the camera.
-
-
-
-
-
Using your hand, lift and remove the shutter button deck from the top of camera.
-
-
To reassemble your device, follow these instructions in reverse order.
Team
University of Alabama, Team 1-4, Sydow campbell Fall 2015 Lid van University of Alabama, Team 1-4, Sydow campbell Fall 2015
UA-SYDOW CAMPBELL-F15S1G4
4 Leden
40 handleidingen geschreven
