Inleiding

Use this guide to replace the keyboard cover of your BlackBerry Curve 8520.

Onderdelen

Geen onderdelen nodig.

Insert a plastic opening tool into the small notch on the rear cover of the phone.
  • Insert a plastic opening tool into the small notch on the rear cover of the phone.

  • Pry the rear cover up from the phone.

Voeg opmerking toe

Locate the slit between the top of the battery and the casing.
  • Locate the slit between the top of the battery and the casing.

  • Gently apply pressure on the top of the battery to trigger the spring release.

Voeg opmerking toe

  • Remove the two Torx T6 screws to the left and right of the battery.

Voeg opmerking toe

  • Using hairdryer or heat gun, warm the front panel to soften the adhesive beneath.

  • Starting from one side, use a plastic opening tool to pry up the screen cover.

    • Work carefully to avoid bending the screen cover.

  • Once one side is loose, gently peel up the entire cover.

Voeg opmerking toe

  • Insert the plastic opening tool in the seam along the side of the device.

  • Slide the tool along the length of the seam, applying moderate force with the plastic opening tool.

  • Carefully remove the faceplate.

Voeg opmerking toe

  • Remove four T6 Torx screws from the front of the phone.

  • Using tweezers, remove the keyboard buttons from the phone.

bb is nt a freely phone is a phone bcz of ringing some how it is nt

tankiso - Antwoord

Conclusie

To reassemble your device, follow these instructions in reverse order.

27 andere personen hebben deze handleiding voltooid.

Matt

Lid sinds: 07-04-11

1.708 Reputatie

5 handleidingen geschreven

Team

Cal Poly, Team 9-62, Walters Spring 2011 Lid van Cal Poly, Team 9-62, Walters Spring 2011

CPSU-WALTERS-S11S9G62

5 Leden

5 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 21

Altijd: 34,566