Ga door naar hoofdinhoud
Word lid van de reparatiegemeenschap - Account aanmaken

Base Replacement

Wat je nodig hebt

  1. Base Replacement, Base: stap 1, afbeelding 1 van 2 Base Replacement, Base: stap 1, afbeelding 2 van 2
    • Remove the four Phillips #0 screws (9.4mm) located at the bottom of the phone on the back side of the base.

    Vraag FixBot

    Voeg opmerking toe

  2. Base Replacement: stap 2, afbeelding 1 van 1
    • Use the spudger to separate the bottom from the top.

    • There are two clips, located top and bottom, that you have to compress with the spudger.

    Vraag FixBot

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Annuleren: ik heb deze handleiding niet afgemaakt.

2 andere personen hebben deze handleiding voltooid.

Josh Showalter

Lid sinds: 02/08/16

442 Reputatie

3 handleidingen geschreven

Team

IUPUI, Team 1-4, Baechle Spring 2016 Lid van IUPUI, Team 1-4, Baechle Spring 2016

IUPUI-BAECHLE-S16S1G4

4 Leden

16 handleidingen geschreven

0Gids Commentaar

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 32

Altijd: 744