Word lid van de reparatiegemeenschap - Account aanmaken

Inleiding

If you are experiencing microphone problems, you may have to repair or replace the microphone. Before this can be accomplished, you must access the motherboard. This guide will show you how to do this.

Wat je nodig hebt

Stap 1 Lower Case

Astak Mole Microphone Replacement, Lower Case: stap 1, afbeelding 1 van 1

Remove the four bottom tabs in order to access the bottom screws.

Vertaal

Vraag FixBot

Stap 2

Remove all four 14 mm Phillips #1 screws.

Vertaal

Vraag FixBot

Stap 3

Remove the SD card.

Vertaal

Vraag FixBot

Stap 4

Pry up the motherboard on the four points using a spudger.
The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.

Vertaal

Vraag FixBot

Stap 5

Gently pull back the motherboard to expose many of the component's wired connections.

Vertaal

Vraag FixBot

Stap 6 Microphone

Astak Mole Microphone Replacement, Microphone: stap 6, afbeelding 1 van 1

Remove microphone from its holder on the bottom section of the casing.

Vertaal

Vraag FixBot

Stap 7

Access microphone and assess damage.

Vertaal

Vraag FixBot

Stap 8

Remove microphone input with metal spudger. Be sure to sever electrical adhesive in order to separate input and output.
It is advised to re-apply adhesive to the cable once the new microphone cable is replaced.
The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.