Ga door naar hoofdinhoud

Assembling the case

Wat je nodig hebt

    • Reinstall the left side panel.

    • Put on the side wall and make sure that the lugs are snapped into the slots provided. Then slide the side panel slightly forward. The side panel should audibly snap into place when pushed forward.

    • Reinstall the right side panel.

    • First attach the side wall and make sure that the lugs have snapped into the slots provided. Then slide the side panel slightly forward. The side panel should audibly snap into place when pushed forward.

  1. Assembling the case: stap 3, afbeelding 1 van 1
    • Place the housing cover back on the coffee maker.

  2. Assembling the case: stap 4, afbeelding 1 van 2 Assembling the case: stap 4, afbeelding 2 van 2
    • Use the Torx T15 screwdriver to tighten the 2 countersunk screws on the housing cover.

  3. Assembling the case: stap 5, afbeelding 1 van 2 Assembling the case: stap 5, afbeelding 2 van 2
    • Using the oval head wrench, tighten the 4 oval head screws on the back of the machine.

  4. Assembling the case: stap 6, afbeelding 1 van 3 Assembling the case: stap 6, afbeelding 2 van 3 Assembling the case: stap 6, afbeelding 3 van 3
    • Replace the water tank,

    • the drip tray with drip tray, pulp tray and pulp container,

    • and place the aroma protection cover back on.

Eindstreep

Één andere persoon heeft deze handleiding voltooid.

Met dank aan deze vertalers:

de en

100%

oldturkey03 helpt ons de wereld te herstellen! Wil je bijdragen?
Begin met vertalen ›

Natalie

Lid sinds: 05/08/19

738 Reputatie

4 handleidingen geschreven

Team

KMM 2019SS Lid van KMM 2019SS

Community

11 Leden

8 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 18

Altijd: 789