Inleiding

This guide will show you how to replace the keyboard in a simple step by step process.

Pull the keyboard tabs toward you while lifting up on the keyboard until it releases from it's hold.
  • Pull the keyboard tabs toward you while lifting up on the keyboard until it releases from it's hold.

  • To lift the keyboard out pull it up and away from you. Then place the keyboard on the track pad.

Voeg opmerking toe

Pull the keyboard ribbon vertically from the logic board to release connection.
  • Pull the keyboard ribbon vertically from the logic board to release connection.

  • The connector may be tight and difficult to remove. If stuck try rocking the connector back and forth while pulling up until it releases. This same process can be used for many of the connectors on this device.

  • Remove battery and CD/DVD drives before proceeding any further.

Voeg opmerking toe

Your computer should look approximately like this.
  • Your computer should look approximately like this.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Byron Hoefer

Lid sinds: 18-04-11

70 Reputatie

3 handleidingen geschreven

Team

Cal Poly, Team 4-2, Regan Spring 2011 Lid van Cal Poly, Team 4-2, Regan Spring 2011

CPSU-REGAN-S11S4G2

4 Leden

7 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 3

Altijd: 1,406