Repareer je spullen Gemeenschap Winkel

AYL SoundFit Motherboard Replacement

Geschreven door: john (en 3 andere bijdragers)
  • Reacties: 5
  • Favorieten: 1
  • Voltooide reparaties: 3

Moeilijkheid

Moeilijk

Stappen

6

Tijd vereist

15 - 45 minuten

Secties

1

Markeringen

2

Confusing Text

Verwarrende Tekst

Een deel van de tekst in deze handleiding is verwarrend, dubbelop of naast de kwestie. Bewerk de tekst en maak hem duidelijker!

Slice and Dice

Knip- en plakwerk

De stappen in deze handleiding moet worden opgesplitst in een reeks van vereiste handleidingen.

  1. AYL SoundFit Motherboard Replacement, Motherboard: step 1, image 1 of 1

    • Unscrew the four hex screws on the top of the device using a 2.5mm hex screwdriver.

    Bewerken

  2. AYL SoundFit Motherboard Replacement: step 2, image 1 of 1

    • Place a spudger between the black plastic cover and the green case.

    • Pry the black cover away from the main casing and remove the cover.

    Bewerken

  4. AYL SoundFit Motherboard Replacement: step 3, image 1 of 1

    • Place the spudger tool between the black housing, which contains the woofer, and the outer rubber casing.

    • Pry the housing away from the body to reveal the motherboard, speaker, and battery.

    Bewerken

  5. AYL SoundFit Motherboard Replacement: step 4, image 1 of 2 AYL SoundFit Motherboard Replacement: step 4, image 2 of 2

    • Remove the two Phillips screws which are holding the battery casing on the housing using a PH00 Phillips screwdriver.

    • Remove the battery case to reveal the battery.

    Bewerken

  6. AYL SoundFit Motherboard Replacement: step 5, image 1 of 1

    • Using a soldering iron, heat up and remove the positive and negative battery contacts from the motherboard.

    Bewerken

  7. AYL SoundFit Motherboard Replacement: step 6, image 1 of 3 AYL SoundFit Motherboard Replacement: step 6, image 2 of 3 AYL SoundFit Motherboard Replacement: step 6, image 3 of 3

    • Remove the three Phillips screws which are holding the motherboard to the base using a PH00 Phillips screwdriver.

    • The motherboard can now be wiggled free from the base.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Auteur

met 3 andere bijdragers

john

Lid sinds: 10-03-16

171 Reputatie

1 Handleiding geschreven

Badges: 5

+2 andere badges

Team

IUPUI, Team 3-3, Harley Spring 2016 Lid van IUPUI, Team 3-3, Harley Spring 2016

IUPUI-HARLEY-S16S3G3

4 Leden

5 handleidingen geschreven

3 Opmerkingen

Where do u get a new motherboard at?

calvinsmith522 - Antwoord

Anybody know where to get a motherboard?

David Whitman - Antwoord

Where do I get a motherboard?

David Whitman - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 5

Altijd: 1,365