Repareer je spullen Gemeenschap Winkel

ATT CL2940 Handset Speaker Replacement

Inleiding

Are you experiencing garbled, choppy phone calls or no audio at all on your landline? Use this guide to restore your phone line’s audio quality for your ATT CL2940 Handset Speaker.

Before we proceed with the replacement, it is crucial to prioritize one’s safety. Soldering and desoldering involve high temperatures, causing potential health risks to you or those around you.

If you are new to soldering and desoldering electronic connections, please follow our Soldering Guide before beginning the handset speaker replacement.

Wat je nodig hebt

  1. ATT CL2940 Handset Speaker Replacement, Handset Speaker: stap 1, afbeelding 1 van 2 ATT CL2940 Handset Speaker Replacement, Handset Speaker: stap 1, afbeelding 2 van 2

    • Separate the two sections of the handset by pushing them apart with the tip of the metal spudger or opening tool.

    Vertaal

  2. ATT CL2940 Handset Speaker Replacement: stap 2, afbeelding 1 van 2 ATT CL2940 Handset Speaker Replacement: stap 2, afbeelding 2 van 2

    • Continue separating the two sections by using the metal spudger all the way around the edge of the handset.

    Vertaal

  4. ATT CL2940 Handset Speaker Replacement: stap 3, afbeelding 1 van 1

    • After separating the two sections of the handset, it should look as shown.

    Vertaal

  5. ATT CL2940 Handset Speaker Replacement: stap 4, afbeelding 1 van 3 ATT CL2940 Handset Speaker Replacement: stap 4, afbeelding 2 van 3 ATT CL2940 Handset Speaker Replacement: stap 4, afbeelding 3 van 3

    • Pull the speaker out gently to detach it from the handset. The speaker is located at the top end of the handset. It is the circular white piece with red and greed wires connected to it.

    • The speaker is attached to the handset with a slightly sticky adhesive.

    Vertaal

  6. ATT CL2940 Handset Speaker Replacement: stap 5, afbeelding 1 van 2 ATT CL2940 Handset Speaker Replacement: stap 5, afbeelding 2 van 2

    • Use a soldering iron to melt the existing solder off of both the red and green wires in order to completely remove the speaker.

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Auteur

met 6 andere bijdragers

Noor Assaf

Lid sinds: 02/15/16

306 Reputatie

2 handleidingen geschreven

Medailles: 11

+8 andere badges

Team

IUPUI, Team 1-1, Harley Spring 2016 Lid van IUPUI, Team 1-1, Harley Spring 2016

IUPUI-HARLEY-S16S1G1

4 Leden

13 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 2

Altijd: 630