Ga door naar hoofdinhoud

4Sight 9 Battery Replacement

Wat je nodig hebt

  1. 4Sight 9 Battery Replacement, Cover: stap 1, afbeelding 1 van 2 4Sight 9 Battery Replacement, Cover: stap 1, afbeelding 2 van 2
    • Place the tablet on its side so that the two screws are facing upward.

    • Remove two 1 mm screws from the left side of the tablet using a Phillips #00 screwdriver.

  2. 4Sight 9 Battery Replacement: stap 2, afbeelding 1 van 1
    • Pry the case away from the device slowly by sliding a plastic opening tool along the device.

    • Once loosened, use your hands to separate the case from the device.

  3. 4Sight 9 Battery Replacement: stap 3, afbeelding 1 van 2 4Sight 9 Battery Replacement: stap 3, afbeelding 2 van 2
    • Hold the positive and negative wires as close as possible to the speaker.

    • Use an opening tool and fingers to simultaneously lift the speaker from the cover.

  4. 4Sight 9 Battery Replacement, Battery: stap 4, afbeelding 1 van 1
    • Use soldering gun to remove the positive and negative wires connecting the battery to the circuit board.

    • For a complete guide on how to solder, click here.

  5. 4Sight 9 Battery Replacement: stap 5, afbeelding 1 van 2 4Sight 9 Battery Replacement: stap 5, afbeelding 2 van 2
    • Insert plastic prying tool under upper-hand corner of battery and slide back and forth.

    • Once loosened, insert plastic prying tool under lower-hand corner and repeat sliding action.

    • Repeat previous actions until battery comes loose from device.

Conclusie

To reassemble your device, follow these instructions in reverse order.

7 andere personen hebben deze handleiding voltooid.

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 8

Altijd: 1,635