Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Inleiding

This guide is to remove the headlamp. Left and right remove identical. This will have to be done to either change a light bulb or to remove the complete headlamp for exchange.

Gereedschap

Onderdelen

Geen onderdelen opgegeven.

  1. Here is the Jeep GC. Removal of the headlamp is identical for both sides. By opening the hood and looking straight down on the headlamp assembly, the 6mm hex head jack screw can be seen. Use a 6mm socket and nut driver to remove the jack screw. 1/4 socket will not fit 9/32 does, but it is a bit sloppy
    • Here is the Jeep GC. Removal of the headlamp is identical for both sides.

    • By opening the hood and looking straight down on the headlamp assembly, the 6mm hex head jack screw can be seen.

    • Use a 6mm socket and nut driver to remove the jack screw. 1/4 socket will not fit 9/32 does, but it is a bit sloppy

  2. De essentiële toolkit

    De meest behulpzame tools in onze meest compacte kit.

    Koop nu

    De essentiële toolkit

    De meest behulpzame tools in onze meest compacte kit.

    Koop nu
  3. Remove the long jack screw. Grasp upper inboard and lower outboard corners of headlamp and forcefully pull headlamp outward. Remove all bulb sockets from headlamp module. Separate headlamp from vehicle.
    • Remove the long jack screw.

    • Grasp upper inboard and lower outboard corners of headlamp and forcefully pull headlamp outward.

    • Remove all bulb sockets from headlamp module. Separate headlamp from vehicle.

Conclusie

To reassemble your device, follow these instructions in reverse order.

5 andere personen hebben deze handleiding voltooid.

oldturkey03

Lid sinds: 29-09-10

668.297 Reputatie

103 handleidingen geschreven

It’s a 7mm socket

Don Marcos - Antwoord

Not on mine. Just rechecked and it is a 6mm on my Jeep

oldturkey03 -

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 14

Afgelopen 30 dagen: 52

Altijd: 5,361