100101 LEG PRESS

WARN Read and follow for each step assembly of

WARNING:

Read and follow all directions for each step to ensure proper assembly of this product.

ASSEMBLY INSTRUCTIONS

IMPORTANT NOTES

Please note:

$ ^{*} $Thank you for purchasing the Parabody 100101 LEG PRESS. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function.

We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy water. Touch-up paint can be purchased from your Parabody customer service representative at (800) 328-9714.

There is a risk assumed by individuals who use this type of equipment. To minimize risk, please follow these rules:

1. Inspect equipment daily. Tighten all loose connections and replace worn parts immediately. Failure to do so may result in serious injury.

2. Exercise with care to avoid injury.

3. Do not allow minors or children to play on or around this equipment.

4. If unsure of proper use of equipment, call your local Parabody distributor or call the Parabody customer service department at (800) 328-9714.

5. Consult a physician before beginning any exercise program.

Tools Required for Assembly

$ ^{*} $3/4" wrench

$ ^{*}9/16 $ wrench

$ ^{*} $ Ratchet with 3/4" and 9/16" sockets

$ ^{*} $ Adjustable wrench

$ ^{*} $ 5/32" Allen wrench

$ ^{*} $ Tape measure

Bolt Length Ruler

NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT.

BOLT LENGTH R:

0 $ \frac{1}{2} $ 1 $ \frac{1}{2} $ 2