GoPro The Remote Waterproof Remote Control User Guide

USER GUIDE

The First Step

You may need to upgrade your camera's software before you can use The Remote. For step-by-step instructions, go to gopro.com/update.

The Basics

1 2 3 4 5 6 7

1. Power Button

2. Status Light

3. Preset Button

4. Status Screen

5. Mode Button

6. Shutter Button

7. USB-C Port

Charging

4

Flip open the USB-C port cover.

Insert the included USB-C cable into the port. Connect the other end of the cable to a computer or other USB power source.

Note: Be sure that the computer is connected to a power source. If the remote status screen does not indicate that the remote is charging, use a different USB port.

！

Powering On + Off

O

POWERING ON

Press the Power button ☐

☐

POWERING OFF

Press and hold the Power button for two seconds.

Wearing The Remote

ATTACHING YOUR REMOTE TO THE STRAP

The attachment strap lets you wear your remote on your wrist or attach it to a grip, bike handlebars, backpack straps, and more.

Heads Up: The Remote is waterproof to 16ft (5m), but will not work under water.

1. Thread the strap through the slots on the back of the remote.

[无法识别]

2. Position the remote along the strap as shown.

C

3. Thread the end of the strap through the underside of the plastic ring.

←

4. Fold the strap back onto itself and use the hook and loop fastners to secure the strap. Fold any excess strap back onto itself for added security.

→

Pairing The Remote and Your GoPro

The Remote can control up to 5 cameras at a time from up to 196 feet (60m) away in optimal conditions. Your camera recognizes only one remote at a time.

Dependent on camera model, terrain, obstructions, electromagnetic