For reMarkable products:

• Model RM02A reMarkable Paper Pro

reMarkable User Guide

0.1 Power button

The power button is located on the top left corner of your reMarkable Paper Pro. It's used for powering on and off, as well as the sleep and wake functions.

How to use the power button:

Put the device in sleep mode with a short power button press. The “reMarkable is sleeping” message will appear on the screen.

• Wake the device from sleep with a short power button press.

Turn off reMarkable Paper Pro with one of the following methods

○ a) pressing the power button for 3 seconds. You will then be asked whether you want to turn off the device or not.

○ b) pressing the power button for at least 10 seconds

Turn on reMarkable Paper Pro by pressing in the power button for two seconds or until the backlight leds starts to blink

• Set the reMarkable Paper Pro into factory reset mode $ ^{*} $ by pressing the button for 25 seconds

$ ^{*} $when the device is in factory reset mode you can use the reMarkable App or web interface to flash new software

Read more about sleep and other power-saving modes in $ \underline{\text{battery settings}} $.

0.2 model name location

The device model number can be located on the backside by removing the bottom right rubber feet.

CONSUDE

CONSUDE

1 Getting started

1.1 Setting up your reMarkable

Turn on your reMarkable and follow the setup assistant to guide you through the process.

The setup consists of a few simple steps that will get your reMarkable ready to go. The device arrives partially charged and doesn't need to be charged before setting up.

Warning: To avoid damage or injuries read $ \underline{\text{important safety and handling information}} $ before using your reMarkable.

1.1.1 What you need to get started

What you need to get started:

• A reMarkable Paper Pro.

USB-C cable and USB power adapter/brick.

• A smartphone or computer.

• Access to a wireless (Wi-Fi) network.

1.1.2 Starting up

Step by step:

1. Press and hold the power button to get started.

2. Test your writing on the display

We designed

to not get on

your brand's way

To help you think.

rcMarkable

reMarkable

Welcome to reMarkable Express yourself (write, sketch, or scribble below) Continue

Connect to Wi-Fi

3. Choose an available Wi-Fi network. If necessary, enter a Wi-Fi password.

< CANVAS display Let's connect to Wi-Fi Connect to Wi-Fi to update your device and sync files. Choose a network... re杜尔基比 GA MyWiFi MyWiFiNet YourNeighbourNet MyOtherNeighbour

4. Type the password and tap Enter.

Download

You can also connect to enterprise networks by entering the following:

EAP method: PEAP

Validate CA certificate: Off

Phase 2 authentication: MSCHAPV2

Enter identity: Type your username here

Enter anonymous identity: Leave this blank

Enter password: Type your password here

Be aware that these settings are all case-sensitive

5. Tap Enter to connect to the Wi-Fi network. Success!

Success! You're now connected to MyWiFi Continue ●○○○

Note: You can choose to skip this step and connect to Wi-Fi from the Settings menu later. This is not