GoPro Smart Remote Long-Range Remote Control User Guide

USER GUIDE

1 0 3

1. Status Light

2. Power/Mode Button

3. Remote Status Screen

4. Shutter/Select Button

5. Settings/Tag Button

6. Charging Port/Attachment Key Slot

7. Status Light

8. Power/Mode Button

9. Remote Status Screen

10. Shutter/Select Button

11. Settings/Tag Button

12. Charging Port/Attachment Key Slot

WEARING THE SMART REMOTE

ATTACHING THE REMOTE TO THE STRAP

The attachment strap secures the remote to your wrist, backpack straps, ski poles, bike frames, and more.

1. Thread the strap through the slots on the back of the remote.

图

2. Position the remote along the strap as shown.

[无法识别]

WEARING THE SMART REMOTE

ATTACHING THE REMOTE USING THE KEY + RING

The attachment key and ring secure the remote to your lanyards, straps, car keys, zippers, and more.

1. Slide and hold the latch lever in the direction of the arrow (A), then pull the key out of the remote (B).

O B A

2. Attach the ring to your lanyard, straps, etc.

コロナ-ウィッシー

3. Push the attachment key into the key slot until it clicks.

$ ^{0} $T0

CHARGING

1. Slide and hold the latch lever in the direction of the arrow (A), then pull the key out of the remote (B).

O B A

2. Insert the charging cable into the remote until it clicks into place.

☑️☑️☑️☑️☑️☑️

3. Connect the other end of the cable to a computer or other USB power source.

Note: Be sure that the computer is connected to a power source. If the remote status screen does not indicate that the remote is charging, use a different USB port.

ひとりりりり

POWERING ON + OFF

POWERING ON

Press the Power/Mode button .