Vind antwoorden in dit document
We hebben alle pagina’s op 21 al doorgenomen, zodat jij dat niet hoeft te doen. Stel je vraag en krijg nu meteen antwoord.
MSI GT680(R)/GX680(R) (MS-16F2) Disassembly Guide
Solution Detail
GT680(R)/GX680(R) (MS-16F2) Disassembly Guide
- BATTERY PACK
2、BOTTOM DOOR ASSY
- HDD MODULE
4、THERMAL-KIT、CPU AND DRAM
-
ODD MODULE
-
SEPARATE UPPER CASE AND LOWER CASE
-
LOWER CASE ASSY
8、UPPER CASE ASSY
9、LCD MODULE ASSY
GT680(R)/GX680(R) (MS-16F2) Disassembly Guide
1、BATTERY PACK
| U↓ | 1.2: Release the "Release" button and move the battery pack base on left picture. | ||
| Component | P/N | Qty | |
| Battery Pack | S9N-3496200-M47 | 1 | |
GT680(R)/GX680(R) (MS-16F2) Disassembly Guide
2、BOTTOM DOOR ASSY
2.1: Remove the 2 screws (M2.5*7mm).
Attention: the screw driver touque is: 2.5-3.0 gf-cm
| Component | P/N | Qty |
| Screw | E43-1257002-G68 | 2 |
2.2: Remove the 6 screws (M2.5*5mm). Then remove the Bottom door.
Attention: the screw driver touque is: 2.5-3.0 gf-cm
| Component | P/N | Qty |
| Bottom door | 307-6F1J211-P89 | 1 |
| Screw | E43-1255001-H29 | 6 |
GT680(R)/GX680(R) (MS-16F2) Disassembly Guide
3. HDD MODULE
3.1: Remove the 2 screws (M2.5*5mm); then remove the two HDD Module according to the direction as pic shows.
Attention: the screw driver torque is 2.5-3.0 Kgf-cm
| Component | P/N | Qty |
| Screw | E43-1255001-H29 | 2 |
3.2: Remove the 4 screws (M3*3.5mm) that stabilize the two HDD bracket, then remove the HDD bracket.
Attention: the screw driver torque is 2.5-3.0Kgf-cm
| Component | P/N | Qty |
| Screw | E43-1303501-H29 | 4 |
| HDD Bracket | E2M-6F10611-C22 | 2 |
| HDD Module | S71-2450701-S70 | 2 |
GT680(R)/GX680(R) (MS-16F2) Disassembly Guide
4、THERMAL-KIT、CPU AND DRAM
O
4.1: Remove the 1 screw (M2.5*5mm) and FAN cable, after that remove the Fan.
Attention: the screw driver torque is 2.5-3.0 Kgf-cm
| Component | P/N | Qty |
| Screw | E43-1255001-H29 | 1 |
| FAN | E33-0800180-MC2 | 1 |
4 5 6 3 2 1
4.2: Remove the 3 screws (M2.5*5mm) and 4 spring screws, after that remove the two Heatsink. Attention: the screw driver torque is 2.5-3.0 Kgf-cm
| Component | P/N | Qty |
| Screw | E43-1255001-H29 | 3 |
| Heatsink | E31-0900332-TA9 | 1 |
| Heatsink | E31-0403231-TA9 | 1 |
4.3: Open the CPU Slot with Screw Driver, then remove CPU Module as below.
| Component | P/N | Qty |
| CPU | OA3-16F2010 | 1 |
GT680(R)/GX680(R) (MS-16F2) Disassembly Guide
4、THERMAL-KIT、CPU AND DRAM
AS.net AS.net AS.net
4.4: Push the two side shielding of RAM as pic shows; Then remove the RAM module
Word gratis lid van iFixit om de volledige handleiding te lezen (21 pagina's)
We vragen je om een gratis account aan te maken, zodat we bots kunnen blokkeren en iFixit voor mensen kunnen houden.
