Ga door naar hoofdinhoud

2.2, 2.4, 2.5, or 2.6 GHz Core 2 Duo processor

759 Vragen Bekijk alle

How to connect keyboard cable in MBP?

MacBook Pro 15" Santa Rosa

Well, I had a little problem with my keyboard a few weeks ago (could not type 'A') so I opened my laptop up according to MacBook Pro 15" Core 2 Duo Models A1226 and A1260 Keyboard Replacement and cleaned the keyboard up (hoping it would solve that problem)... But then I could not figure how to "slide the keyboard ribbon back into the connector" so I'm left with a laptop without a working keyboard... I've tried stuffing it back in but it would only go in about 1mm, not enough to make the connection... any way to connect it back in?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score -1
Voeg een opmerking toe

3 Antwoorden

Gekozen oplossing

It's a cam - it lifts up (very gently from the insertion end) you insert the ribbon cable then push the cam back down.

If this Answer is helpful please remember to return and mark it Accepted.

Was dit antwoord nuttig?

Score 2

3 opmerkingen:

how do i lift it up?

door

Get a magnifying glass, examine the connector. Lift up the black plastic flap holding the ribbon in place (vertical ) slide in the ribbon, press down the flap.

door

oh.. so it is opened from the back? haha ok i'll try again...

door

Voeg een opmerking toe
Het nuttigste antwoord

See step #11 of the guide you used.

Was dit antwoord nuttig?

Score 3

1 Opmerking:

the problem is that the guide does not show the outcome of flipping the flap up... anyone can post a photo of it? haha...

door

Voeg een opmerking toe

Use tweezers, they help in get a little more of cable and then push it into the slot deeper)

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

xkiller213 zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 2,366