Repareer je spullen Gemeenschap Winkel

2.26 or 2.4 GHz / White plastic unibody enclosure

645 Vragen Bekijk alle

Opties

MacBook LCD Will not light up even after LCD replacement (Backlight)

Hey guys, I have a Late 09 Polycarb Unibody with backlight issues. I was quoted 200+ at the Genius bar to replace the LCD but decided to change it myself. After a quick installation, I'm still facing the same issue. The screen is powered on yet the backlight is not there and is extremely dim. I can even see the Brightness meter moving across the screen.

Is the next step checking out my logic board? I feel like this won't end well.

Thanks all.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score -1
Voeg een opmerking toe

2 Antwoorden

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

First try hooking it up to an external monitor to isolate the problem. Did you get the part from a reputable dealer or off eBay?

Sounds like an inverter board issue, Apple part # 922-8280, to be sure on the part number we need the last three figures of your serial number. The inverter cable is Apple part # 922-8281 but these are only on the Early 2009 machines, so check to see which machine you have.

Was dit antwoord nuttig?

Ja Nee
Score 2

1 Opmerking:

sorry sir but there is no any inverter board inside the display clamshell. there is only paper led inside and the LCD cables and network cables only.

door

Voeg een opmerking toe

Opties

Check the cables.

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe

Voeg je antwoord toe

novacaak zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 783