Ga door naar hoofdinhoud

Repair guides, support, and troubleshooting information for the first 13-inch MacBook Air to feature Apple's Arm-based M1 SoC (with an 8-core CPU and up to an 8-core GPU). Released in November 2020 and identified by model numbers A2337 or EMC 3598.

175 Vragen Bekijk alle

What’s causing these screen artifacts?

Hello Guys. I was just running a heavy ffmpeg render when suddenly the left side of my screen started with these weird lines. So at first I suspected I fried the GPU but they’re not visible on an external display (phew). What’s weird about these artifacts is that they’re not consistent. They‘re mostly gone but sometimes reappear and then disappear again. It doesn’t seem to be related to movements of the mac either. Could this be related to the flex cable or is my screen broken? Any help or insights are highly appreciated

Block Image

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

Rendering is often the heaviest of processing jobs your system is asked to preform and creates by far the most heat. While Apples M series SoC runs cooler than Intels CPU, Apple cut back on this series cooling as such you maybe expecting a bit to much from it.

Here we have the signs of the T-CON logic which is that dangling piece attached to the display that sits inside of the upper case. Review this image while not the best the silver shield area is the logic which has either over heated or the ribbon cables/LCD panel has failed. In any case replacement will be needed Display Assembly Compatible with MacBook Air 13" (Late 2018-Early 2020)

Display Assembly Compatible with MacBook Air 13" (Late 2018-Early 2020) Afbeelding

Product

Display Assembly Compatible with MacBook Air 13" (Late 2018-Early 2020)

$379.99

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Maximilian Maaßen zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 8

Altijd: 27