Opties

power port on chassis loose

Hi.

The port to plug my ac adapter into is loose. whenever I go to plug it in, the plug always falls out. I've checked why, and it appears that I've broken the foundation it was attached to.

I can still charge, so that's not the issue.

What can I do to reconnect it to the "base" it's attached to, so it won't constantly fall out?

I'm guessing this has to do with opening the case, and getting down to the motherboard. As well as either some soldering, etc....

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee

Score -1

3 opmerkingen

Please give the last three figures of your serial number.

26 mrt. 2012 door mayer

the last 3 of the SN is

RJ7

26 mrt. 2012 door Steve

Apple PowerBook G4 1.5 12" (Al) Specs

Identifiers: 12-Inch - 1.5 GHz - M9690LL/A* - PowerBook6,8 - A1104 - 2030

27 mrt. 2012 door mayer

Voeg een opmerking toe

Gepost: 27 mrt. 2012

Opties

The main problem is getting to the screw that holds the DC-IN board in place, here's the guide: PowerBook G4 Aluminum 12" 1-1.5 GHz DC-In Board Replacement

The screw is usually held in place with one screw and is covered by a piece of tape. It's about the last thing to be removed when tearing down this machine so you can actually superglue it into place along with using locktite to secure the screw.

Was dit antwoord nuttig?

Ja Nee

Score 2

Voeg een opmerking toe

PowerBook G4 Aluminum 12" 1-1.5 GHz

power port on chassis loose

1 Antwoord

Voeg je antwoord toe