My front usb-c connector stopped working, when I plug into the regular USB it works but when I plug into the usb-c I get a message on the screen saying usb device drawing too much power; even if I just plug in a cable with no phone or controller plugged in.
Is dit een goede vraag?
Rep: 1,3k
30
3
3
The USB Type-C port pins have likely been damaged/bent to the point they touch each other and short, triggering the overcurrent protections and causing the error message to display. Buying a USB board replacement and following this procedure will likely completely eliminate your problem.
Was dit antwoord nuttig?
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 2
Afgelopen 30 dagen: 2
Altijd: 16
