Repareer je spullen Gemeenschap Winkel

Repair guides and support for your LG TV.

1346 Vragen Bekijk alle

Opties

My Oled tv doesn´t turn on after bezel was bent,

Hi

I recently acquired an LG oled TV (OLED55CX6LA) for free. The tv won´t turn on after

the bezel around the screen was dented (very small dent!).

The TV only goes to standby and when I try to turn it on the relay clicks once and it goes back to standby. I tried disconnecting the four panel connectors to the T-con board one by one to no effect. I then disconnected the lower cable connecting the main board to the t-con board and then turned on the tv. Still no picture but the relay didn´t click when the cable was disconnected.

Any ideas on what the issue might be?

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Het nuttigste antwoord

Opties

At first this sounded like a possible power supply issue but since there was no relay click after you disconnected the mainboard I would suggest you check for any damages on your mainboard and your T-board. I believe the issue might be revealed there. Maybe the dent caused minor but critical damage?

Was dit antwoord nuttig?

Ja Nee
Score 1

1 Opmerking:

Hi, thank you for answering. I will take them out and let somebody look at them (I have very limited experience with electronic repair).

door

Voeg een opmerking toe

Voeg je antwoord toe

Ágúst Ingvarsson zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 9

Altijd: 69