Rep: 43
3
hi
when i insert my cartriges one by one it recognizes them up to 5 cartriges but when the last one is inserted i get the error that all cartiges can not be recognized.
i have replaced flat cables, printhead, cartrige reader
what else shoul i do?
Is dit een goede vraag?
Rep: 43
3
there is a fuse on the main board fuse no.2 it is broken replace it and the issue will be solved.
it is caused by incorrect manual head cleaning.
Was dit antwoord nuttig?
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 2
Afgelopen 30 dagen: 3
Altijd: 25
[image|3140460]
i got it solved
there is a fuse on the main board fuse no.2 it is broken replace it and the issue will be solved.
it is caused by incorrect manual head cleaning.
door Saman