Repareer je spullen Gemeenschap Winkel

{A1989 / EMC3214}—Released in July 2018, the 13" MacBook Pro features quad-core i5 and i7 processors and Intel Iris Plus integrated graphics.

203 Vragen Bekijk alle

Opties

MacBook not starting after battery replacement

Replaced the battery on my 2018 Macbook Pro Touchbar, turned it on, and it started, Coconutbattery said it was at 100% battery health with 0 battery cycles. I took out the battery, used the adhesive strips to glue it in, and then put it back together. Now, when I try to start it, it shows no signs of life. I've tried reinstalling the battery several times, as well as starting the Macbook while plugged in. Is there anything else I could do? How else can I troubleshoot this issue? Thanks in advance :)

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste

Opties

Did you forget to fully shut down the system the second time? Refer to Step 1 in this guide MacBook Pro 13" Touch Bar 2018 Vervanging van de batterij

At this point you need to connect a second Mac via USB-C using Configurator2 App to recover things.

Was dit antwoord nuttig?

Ja Nee
Score 0

2 opmerkingen:

Thanks for the response! It looks like I did forget to disable auto boot before doing the repair. Will I be able to get the Macbook working again? If so, how do I go about doing that. Thanks again!

door

@maximm65709 - You need to leverage a second system to run Confurator2 apps

door

Voeg een opmerking toe

Voeg je antwoord toe

Maxim M zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 4

Afgelopen 30 dagen: 6

Altijd: 47