Ga door naar hoofdinhoud

Released on September 24th 2021, the iPhone 13 mini is a smaller version of Apple's iPhone 13 and is the second mini iPhone. It features a 5.4-inch OLED, an A15 Bionic processor, and dual rear cameras.

31 Vragen Bekijk alle

13 Mini restarting randomly SMC PANIC - ASSERTION FAILED - BSC failure

Hi,

my iPhone 13 Mini crashes and restarts every 3 minutes. Error log shows SMC BSC failure of type 0x1000 , which should be the proximity flex cable. However, after disconnecting it, the error continued to exist. Is this possible? Should I still change the proximity flex cable altough disconnecting it didn't result in a fix?

Block Image

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

Disconnecting it doesn’t resolve the issue. You’ll need to connect a known good to get the error to clear. The issue is that it’s not getting communications from a sensor on this cable. Disconnecting it will continue to produce this error since the sensor is still not present. It needs a good sensor that can communicate properly with the CPU to be connected.

Was dit antwoord nuttig?

Score 3

2 opmerkingen:

thanks! I will try that and report my results asap.

door

Did it end up getting fixed?

door

Voeg een opmerking toe

Voeg je antwoord toe

Zhi-Yuan zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 5

Afgelopen 7 dagen: 35

Afgelopen 30 dagen: 125

Altijd: 968