Repareer je spullen Gemeenschap Winkel

Released on September 24th 2021, the iPhone 13 mini is a smaller version of Apple's iPhone 13 and is the second mini iPhone. It features a 5.4-inch OLED, an A15 Bionic processor, and dual rear cameras.

31 Vragen Bekijk alle

Opties

iPhone 13 mini restarting, SMC PANIC - ASSERTION

Please help me with this error, i tried to reinstall the IOS but no changes.

It has a screen changed and the rear, front camera doesn't work. I bought today as it is.

Can be any chances by the screen causing restarts ?

I read some articles that can be the Charger cable flex thing or proximity sensor flex , but i'm not sure. :(

I disconnected the charger cable flex and keep restarting.

panic(cpu 0 caller 0xfffffff02b8469ac): SMC PANIC - ASSERTION FAILED: target/d16/target.cpp:263: 0, SMC BSC failure, spreadsheet ver(*10) 190

S.sensor array 0 - 6 is 0x0, 0x400, 0x0, 0x0, 0x0, 0x0, 0x0

F.sensor array 0 is 0x0

- Misc(2) OUTBOX1 not ready

ASSERTION FAILED: target/d16/target.cpp:263: 0, SMC BSC failure, spreadsheet ver(*10) 190

S.sensor array 0 - 6 is 0x0, 0x400, 0x0, 0x0, 0x0, 0x0, 0x0

F.sensor array 0 is 0x0

#

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 2
1 Opmerking

what d u do?

door

Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Het nuttigste antwoord

Opties

There's a whole section on this panic on the iPhone Kernel Panics page, but in summary, you're on the right track.

Panic Assertion failed is usually related to some sensor that isn't checking in with the System Management Controller (SMC).

The unfortunate part is that the sensor in your panic points to an issue with the logic board. The x400 sensor is specific to the iPhone 13 mini. The logic board for any iPhone X or new (save the XR and the 2020 and 2022 SE variants) has a stacked logic board. It's really two separate boards sandwiched together.

The x400 sensor is on the bottom board. Usually something like that would be caused by bend, or substantial drop. There could be a break in the connection between the boards, or an issue with the bottom board itself. That will require soldering and some very specialized tools to repair.

If the device is still under warranty, be sure to check with Apple. If it's not otherwise damaged, this should be covered.

Was dit antwoord nuttig?

Ja Nee
Score 1
Voeg een opmerking toe

Voeg je antwoord toe

Banana Joe zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 27

Afgelopen 7 dagen: 208

Afgelopen 30 dagen: 842

Altijd: 6,463