Repareer je spullen Gemeenschap Winkel

Repair your Dyson V6 Animal vacuum with a part replacement guide.

3 Vragen Bekijk alle

Opties

Flashing red light when trying to use my vacuum

I am getting a steady interval flashing red light when trying to use my vacuum. (I stopped counting at 25 consecutive flashes.)

It properly charged during its last charge but will not function. My instinct tells me this may be a battery issue as I'm sure it's reached its maximum charge/disbursement lifetime.

I also notice that if I plug it in to charge now, I get the same flashing red light. It has not been dropped or anything else.

Is a battery the correct component I should be eyeballing?

Many thanks!

Kim K.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

If the LED indicator on your Dyson V6 flashes red when the vacuum is on or charging, it means the battery is faulty and the vacuum cannot be powered on or charged. The battery will need to be changed to address the flashing red light issue.

You can try resetting the battery by unplugging the charger from the wall, plugging it back in, connecting it to the vacuum, pulling the trigger and holding it for 20 seconds, and then letting go of the trigger.

Otherwise, here's the battery you'll need: https://www.dyson.com/support/journey/to...

Was dit antwoord nuttig?

Ja Nee
Score 1

1 Opmerking:

The light is blue on the charger. As he said, when using the vacuum, it turns red and flashes. In other words, it's not the battery.

door

Voeg een opmerking toe

Voeg je antwoord toe

Kim K. zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 44

Afgelopen 7 dagen: 219

Afgelopen 30 dagen: 1,022

Altijd: 7,756