Repareer je spullen Gemeenschap Winkel

A1706 / EMC 3071—Released in November 2016, this 13" Macbook Pro introduces the OLED Touch Bar. Features a dual-core "Skylake" Intel Core i5 CPU and four Thunderbolt 3 ports.

241 Vragen Bekijk alle

Opties

Can I take a A1708 Logic Board out and put in the body of a A1706

I have a A1706 (Four Thunderbolt Ports + Touch Bar) with a dead logic and I also have a A1708 (2 thunderbolts ports) with flexgate display... can I put my working A1708 Logic inside my a1706 Body to use the good display and Touch Bar or no?

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste

Opties

I think you need to go the other way around sliding the working display over to the the system with the damaged display.

You really can’t transfer the logic board as the Fn models USB ports are part of the logic board and at a slightly different location. And there is no means to connect the TouchID and TouchBar. Besides you would end up with two holes!

Well.. the iFixit part lists both series so I guess it’s possible to just swap the display over! MacBook Pro 13" Retina (Late 2016-2017) Display Assembly

MacBook Pro 13" Retina (Late 2016-2017) Display Assembly Afbeelding

Product

MacBook Pro 13" Retina (Late 2016-2017) Display Assembly

$454.99

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe

Voeg je antwoord toe

zerubens zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 15

Altijd: 155