The iOpener highly resembles commercial reusable ice/heat packs just with a shape more useful for electronics repair. It's not mentioned anywhere on the site (as it's outside its intended use) but can it be chilled?
Is dit een goede vraag?
Rep: 685,3k
3,4k
1,1k
2,6k
Yes, it can be used frozen, but I would put it in a plastic bag first to prevent moisture infiltration.
Was dit antwoord nuttig?
Rep: 127,8k
178
123
276
Yes, it can be frozen, but be careful when bending the iOpener while the plastic housing is cold. The liquid inside is fine to freeze, but flexing the plastic while very cold can cause tiny tears/fractures in the plastic that can leak once the iOpener has warmed up.
Was dit antwoord nuttig?
Rep: 479,4k
35
329
971
Why would you want to freeze it? What repair application would benefit using it that way?
The tool is intended to soften adhesive bonds using heat.
Was dit antwoord nuttig?
Sometimes i need to cool stuff I'm working on - not necessary repairs but other projects.
@fufs - I don’t think any one tested it in that way.
I would be careful, I would recommend you place it in a thick walled storage bag when freezing and use it that way as well.
Maybe it would be best getting something else.
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 4
Afgelopen 30 dagen: 11
Altijd: 88
1 Opmerking
Mine has been in the freezer for a while and like a ice pack it wont freeze but stays extremely cold, if you plan on using it like a ice pack is probably not the best idea because you cannot wrap it or bend it around body parts as there isn't much air in it.
door L'atelier Info