How to replace the JBL BMS Board with a 2S BMS Board?

Hello Everyone,

My JBL Xtream 3 has stopped working so I replaced the battery with 18650 batteries. it worked for 1 month and again it failed. it cant be turned on without a charger. Then I realized it was the BMS Board. To replace the BMS board with HX-2S-A10 BMS Board

, I couldn't find any Diagrame to that 6-wire connector that JBL Xtream 2/3 has. Especially the middle white and yellow wires.

As in the picture attached white was connected to the D and yellow to the C. Black to the P- and red to the P+.

Can you help?