Ga door naar hoofdinhoud

Model A1990 / EMC 3359. Released in May 2019 with new 6-core and 8-core processor options.

88 Vragen Bekijk alle

Touch ID security in flat or switch?

broke the touch id flat replacing topcase…

Is the security in the button or on the flat cable?

i am thinkin of buying a new touch id cut it and solder the button to my old flat will this work?

I dnt want to change my logic case and i like to use the fingerprint 😅

So is t2 security thing in flat or in button itself?

Thxx ?

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

Het nuttigste antwoord

The sensor is the top black plate, the power button is the blister switch below. Sadly, without the original sensor your system won’t work properly. This will require a new logic board and the mated sensor.

Block Image

TouchID sensor

Block Image

The power switch

Was dit antwoord nuttig?

Score 1

3 opmerkingen:

I cant remove the sensor from my old switch?

door

is the t2 security thing on the red or the yellow part ?

to see if i can soldier the button

door

@gjvjojvnsj4nn12 - Apple designed the part so it can’t be altered as that effects the security of the TouchID and the invalidates the T2 encryption so the system is the workable.

The first image is the TouchID sensor marked in red. The second image is the power switch again marked in red.

door

Voeg een opmerking toe

Voeg je antwoord toe

george.kassab zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 9

Altijd: 74