Repareer je spullen Gemeenschap Winkel

Nintendo's upgraded version of the Nintendo 3DS. It features bigger screens, longer battery life, better pixel density, and a better design.

412 Vragen Bekijk alle

Opties

Liquid in the digitizer

hey,

so my kids somehow managed to get water inside the digitzer, i tore the device down and its solely the digitizer from the inside, i have let it sit with some silica gel for 10 hours already but there is no sign of the moisture disappearing, i was wondering if i could heat it up with a heat gun/hair dryer so it evaporates faster

thanks

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 1
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste

Opties

Hi

I wouldn’t recommend heating the display as you will most likely burn the glue in between the layers

Unfortunately you may have to buy a new one unless you want to take a gamble

You could also try and disassemble the backlight as that’s where most of the water will gather but please do this at your own risk

Hopefully this helps

Any questions please ask

Thanks:-)

Was dit antwoord nuttig?

Ja Nee
Score 0

4 opmerkingen:

the thing is, its not the LCD its the digitizer i was wondering if i could heat it up

door

@hajis

If you use heat below 120deg c you might get away with it

Probably needs replacing though

I would attempt at your own risk:-)

door

alright thank you ill try my luck

door

@hajis

Good luck!

Btw I meant 120deg c not 12 XD

door

Voeg een opmerking toe

Voeg je antwoord toe

hajis zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 34