Ga door naar hoofdinhoud

Model A1419 / Late 2012 / 2.9 & 3.2 GHz Core i5 or 3.4 GHz Core i7 Processor, ID iMac13,2

330 Vragen Bekijk alle

Not starting up after hard drive replacement

I purchased an iFixit SSD replacement for the internal HD on my late 2012 iMac that was starting to report bad sectors and would not run properly. The SSD install went without a hitch and the last step before reattaching the screen I hooked the cables up and tried powering it up. The internal fan comes on and I have a green led near the bottom center of the logic board that illuminates but I get no startup chime or any display activity. Can anyone point me in the right direction for a possible solution?

Update (02/06/2023)

Just figured out that the LED that I thought was lit is actually 3 diagnostic LEDs 1, 2 and 3. The top one, #4 is not lit

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

If you have the display disconnected this is why #4 is not lit.

As you new drive is virgin it doesn’t have the OS installed. So you need to format and install the OS on to your new drive.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Lee Mooring zal eeuwig dankbaar zijn.

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 2

Altijd: 26