Repareer je spullen Gemeenschap Winkel

Repair guides, support, and troubleshooting information for the first 13-inch MacBook Air to feature Apple's Arm-based M1 SoC (with an 8-core CPU and up to an 8-core GPU). Released in November 2020 and identified by model numbers A2337 or EMC 3598.

175 Vragen Bekijk alle

Opties

Laptop not turning on after screen replacment.

The laptop is on MacOS Ventura. I replaced the screen, it turned on for a few seconds then shut down.
It does not take more than .4A at 5V.
Could the new screen have fried the computer?

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 1
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Het nuttigste antwoord

Opties

The new display could just be faulty. Test with the old screen and see if you can get it to power on normally. Even if the screen is not working properly, you should be able to tell it’s powering on and booting normally based on the power reads on your meter.

Was dit antwoord nuttig?

Ja Nee
Score 1

3 opmerkingen:

Hi there,
Thanks for that. Have tried the old screen and same result. The laptop will just not start.
It takes the above values the first time you plug it in, but when plugged in a second time, it will not take any current.

Thanks

door

@smashedhamish If everything was working properly before the screen replacement, then more than likely something got damaged during the repair. Or the new screen was faulty in a way that caused an issue with the board. I have never seen that happen myself, but it's certainly possible depending on how the screen was faulty.

door

we had this problem on 2 straight devices, both A2337 running Ventura only take 0.41A, tried old screens, no screen, new screen - same issue. We do 2-3 of these a week so its quite bizarre.

door

Voeg een opmerking toe

Voeg je antwoord toe

Hamish zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 5

Afgelopen 30 dagen: 20

Altijd: 172