Vizio M70 - C3
As shown below, when tv boots it is extremely blurry and gives no picture. I have attempted moving it to a different outlet, I have taken the back panel off and other than a bit of minor dust there was no wear or tear on any of the panels from what I could tell.
Is dit een goede vraag?
Rep: 1
4
1
Adjust the TVs Picture Mode
To access the Picture modes, press the 'Menu' button on your VIZIO remote & then use the arrow keys to high the 'Picture' option. You should now see a 'Picture Mode' option that can be adjusted. Choose whichever mode you prefer.
Regards,
Will
Was dit antwoord nuttig?
Afgelopen 24 uren: 1
Afgelopen 7 dagen: 9
Afgelopen 30 dagen: 73
Altijd: 756
Hi @vortexpit,
Are the TV menu screens clear?
have you tried using different inputs e.g. HDMI, AV video, Component video, RF (coax) to see if the image improved?
Have you tried using a different signal source e.g. dvd player etc to check the display?
Just trying to isolate what and where the problem is although at the moment its looking like a mainboard or tcon board problem
door jayeff