Repareer je spullen Gemeenschap Winkel

2 Vragen Bekijk alle

Opties

What type of connector is used for the base station power cable?

The cable going between the wall wort and the base station had the connector snap in the wall wort. It's a small two prong adapter with a plastic flange that seems like it'd be relatively simple to re-solder if I could find a spare, but I have no idea how to find it. A name or a purchase link would be fantastic. To be clear I am referring to the plug on the other end of the cable from the barrel plug. I believe it is some kind of molex connector?


Female:

Block Image


Male (this is the part I need to replace):

Block Image

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
2 opmerkingen

A pic would be super helpful

door

Updated with photos. I've done some more digging and I think it might be a molex micro-connect

door

Voeg een opmerking toe

2 Antwoorden

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

This is most likely a molex connector, as you have pointed out.

As far as I can tell, this should be part number 436450200 which you can view and also get a 3D model of on their official website.

Was dit antwoord nuttig?

Ja Nee
Score 3

1 Opmerking:

PS: Had the same issue on mine. I feel like this was a very bad design choice...

door

Voeg een opmerking toe

Opties

The type of connector used for the base station power cable is typically either a barrel connector or a DC plug.

A barrel connector, also known as a coaxial power connector or a cylindrical power connector, is a circular electrical connector that is commonly used for providing power to electronic devices. It typically consists of a central pin surrounded by an insulating sleeve and an outer metal cylinder that helps to hold the connector in place.

A DC plug is a type of connector that is used to deliver direct current (DC) power to electronic devices. It typically consists of a cylindrical body with metal pins or blades that are inserted into a corresponding socket or jack to deliver power.

Both of these types of connectors are commonly used for providing power to base stations, due to their low cost, ease of use, and reliable electrical connection.

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Walter Gray (Shenanigans) zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 4

Afgelopen 30 dagen: 12

Altijd: 453