Repareer je spullen Gemeenschap Winkel

Guides and repair information for Kenwood mixers.

99 Vragen Bekijk alle

Opties

Mixer model kmx50 accelerate and slow down speed control no reaction

So far have replaced with new electrical module where all components are fitted together like speed control dial and capacitors and problem not solved, mixer it self have only three electrical components the main module and speed sensor and the corpse open sensor, there should be easy fix otherwise the motor is defective but is running continuesly at low speed so difficult to say is defective.

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Het nuttigste antwoord

Opties

SOLVED UPDATE

Problem was the speed control sensor located above on the motor with three cables, never thought such tiny part make the stand mixer defective. This sensor is installed on more kmix models so if you have such issue then you know where to look.

Was dit antwoord nuttig?

Ja Nee
Score 2

1 Opmerking:

My mixer same thing, speeds up and then slows to 30%. The sensor between the fan and motor was rubbing on the magnet and wore away the hall effect sensor. I got a replacement item KW710626 about £10 and that fixed the problem. I fixed sensor board in place so sensor no longer rubs.

The hall effect sensor had marking 44e 106 if you want to find just the part to replace (3 legged small square device)

door

Voeg een opmerking toe

Voeg je antwoord toe

George zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 11

Afgelopen 30 dagen: 32

Altijd: 416