Repareer je spullen Gemeenschap Winkel

Early 2011 Model: A1278 / 2.3 GHz i5 or 2.7 GHz i7 processor

782 Vragen Bekijk alle

Opties

No LCD backlight after replacing inductor

About a month ago I had to replace a missing inductor (L9004) on my early 2011 MacBook pro. I just got them in the mail today and successfully soldered the inductor. The screen now turns on, however now I have no backlight on the LCD. I know the screen itself isn't the issue and I'm unsure what to look for on the motherboard. For all I know I could've damaged something when I was using the heat gun. I'm still relatively new to all this stuff. If somebody could give me some tips on what to look for or test that would be great!

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste

Opties

your problem is more than likely that your backlight cable was damaged during the process of replacing said part

Was dit antwoord nuttig?

Ja Nee
Score 0

2 opmerkingen:

I had the display removed from the laptop when I was doing the repair so that eliminates the display cable. Do you have any other ideas?

door

try re connecting the cable. its possible debris got in between the backlight connection

door

Voeg een opmerking toe

Voeg je antwoord toe

Chase Simering zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 2

Altijd: 43