Ga door naar hoofdinhoud

Model A1419 / Late 2012 / 2.9 & 3.2 GHz Core i5 or 3.4 GHz Core i7 Processor, ID iMac13,2

330 Vragen Bekijk alle

iMac 27-inch, Late 2012- Problem with 3 b4 slots for RAM

Hello. My Imac (27-inch, Late 2012) has the original memory (2x4GB Elpida) in slots 1 and 2. When trying to install in slots 1+3, 1+4, 2+3, 2+4 it beeps three times and the Mac does not start. Replacing the original memory in slots 1+2 with new memory (2x8GB) is successful. Can not add memory to slots 3 and 4 (old memory or new). Please advise where to look for the problem.

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0

1 Opmerking:

As you can see here your system can support 32GB!

But you need the correct SO-DIMMs

PC3-12800 1600 MHz DDR3L SDRAM (204-pin)

27” iMac "Core i5" 2.9GHz

27” iMac "Core i7" 3.4GHz


Voeg een opmerking toe

1 Antwoord

If you have the correct RAM, then make sure the SO-DIMM’s are properly inserted and the contacts are clean.

Was dit antwoord nuttig?

Score 0

2 opmerkingen:

original memory installed in slots 1 + 2 or 1 or 2 works fine. If the original memory is installed in slots 1+3 or 1+4 or 2+3 or 2+4 or 3+4 or 3 or 4. Slots visually clean, slot 3 and 4 do not differ from 1 and 2. Maybe the problem is in slots 3 and 4 ?


@Олег Б. - Then the RAM slot is damaged.


Voeg een opmerking toe

Voeg je antwoord toe

Олег Б. zal eeuwig dankbaar zijn.

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 2

Altijd: 110