Repareer je spullen Gemeenschap Winkel

Model A1312 / Mid 2011 / 2.7 & 3.1 GHz Core i5 or 3.4 GHz Core i7 Processor, ID iMac12,2

710 Vragen Bekijk alle

Opties

Display is white and the machine reboots continously

Hello everybody.

My machine, an iMac (27-inch, Mid 2011) gave me a black screen yesterday, out of the blue, and after I rebooted it it starts the boot process with the Apple horizontal bar but at the mid point it goes blank as in the two pictures below.

Anybody has any ideas before I bring to service next week, please?

Block Image



Block Image

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Het nuttigste antwoord

Opties

Your system is getting stuck within POST. Let’s see if we can get past it, with a USB keyboard, restart and press the T key to enter into Target Disk Mode. You should see the FireWire and Thunderbolt icons on the screen are you able to get to that?

Was dit antwoord nuttig?

Ja Nee
Score 1

1 Opmerking:

Thank you kindly @DanJ.

I took the unit to service as I only checked the SSD and the RAM. I suppose it's the NVidia graphics card but I will let the technicians to do a diagnostic and try to repair the damage if possible.

I will start looking for a Logic Board to replace the old one. I already did it with my old MacBook Pro 17" Late 2011.

Thank you kindly.

door

Voeg een opmerking toe

Voeg je antwoord toe

IONEL GRECESCU zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 3

Afgelopen 7 dagen: 5

Afgelopen 30 dagen: 8

Altijd: 24