Ga door naar hoofdinhoud

Reparatie-informatie voor de Sony PlayStation 5 DualSense-controller. Modelnummer: CFI-ZCT1W FCC ID: AK8CFIZCT1

81 Vragen Bekijk alle

What would cause a bumper button to not work

I have a PS5 Dualsense remote with a suddenly non-functioning R1 button.

  • No physical damage to the remote from dropping/excessive force has been exerted
  • No water damage
  • The black plastic part of the button is in the correct position. Removing to access the silicone part of the bumper button and pressing with a pry tool/screw driver does not work
  • R2, L1 and L2, as well as all other functionality is perfect
  • The remote is a v1 remote

I've tried disassembling the remote and investigating, nothing out of the ordinary to report and I'm at wits end. Any guidance would be appreciated.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

Ended up being a microtear in the ribbon cable through some of the middle connections, which obviously affects the R1 button in particular.

Easy enough to replace, but I can imagine that with the design of the right ribbon cable being more exposed it could potentially lead to more issues over the left one

Was dit antwoord nuttig?

Score 0

1 Opmerking:

Had to buy a new L1 bumber it goes in normally & even works but won’t stay in the holder whatsoever. Falls right out when I turn controller upside down or tip it over confused tried everything what could it be ?

door

Voeg een opmerking toe

How do you fix the micro tear

Was dit antwoord nuttig?

Score 0

1 Opmerking:

Replacement ribbon cables can be found on Amazon. Watch for the generation controller you have though as apparently there are several and some use slightly different cables.

door

Voeg een opmerking toe

Voeg je antwoord toe

Jarod Kurland zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 15

Afgelopen 7 dagen: 67

Afgelopen 30 dagen: 294

Altijd: 2,975