Rep: 13
1
1
I know Torx 3 screwdriver is required to remove the SSD, but if the retention screw is lost, what exact size screw requirements do I need to obtain a replacement?
Is dit een goede vraag?
Rep: 28,5k
9
13
64
I don't know the exact size.
For minimal cost why not just buy a selection of small screws - it doesn't have to be Torx as Philips is fine.
Try them gently until one screws in easily.
Was dit antwoord nuttig?
The diameter of the screw is m 1.2. The tricky part is to find a fastener so that the screw can hold the SSD. So far I only could find Screws which were too long. I shortned one to fit correctly but the problem with the fastner still gives me headache.
Was dit antwoord nuttig?
If your Screw Strips, like the one of my GF did, you will need a M 1.2 x 2 Screw and a washer to secure the SSD again. I got mine here: https://online-schrauben.de/shop/
They aren't cheap but the fit, aren't too long and work properly, unlike the ones you get from Amazon.
The dimensions I used are:
DIN 84 ST M 1,2 x 2 (Screw)
ISO 7089 A2 200HV 1,6 (Washer)
Have a good one guys.
Afgelopen 24 uren: 3
Afgelopen 7 dagen: 16
Afgelopen 30 dagen: 83
Altijd: 1,599
