Half the Picture is Black

Put the camera into Bulb mode with the lens off, when you press the shutter does the mirror go up quickly? Also when you release the shutter the mirror should snap back down. Often the cushion at the bottom and at the top of the mirror box gets gummy so it causes the mirror to stick. That is if the bottom of the image is black with a soft edge.

Was dit antwoord nuttig?

Ja Nee

Score 0

2 opmerkingen:

Hi, Thank you for the response. The Mirror does go up quickly and back down again. Looking at the pics, it is the top of the image that is black.

7 jun. 2022 door Robert Hicken

@Robert Hicken - the images is inverted (upside down) when it hits the CCD detector which is why the image is why the bottom edge (ground) would be dark (just like a film camera) if the upper edge is dark then that would be the CCD sensor having some damage or something is sitting on top of it blocking the light from reaching it.

8 jun. 2022 door Dan

Voeg een opmerking toe

Hi Robert! did you manage to solve the problem? I'm having the same issue — Lucas Mulim
Hi, Thank you for the response. The Mirror does go up quickly and back down again. Looking at the pics, it is the top of the image that is black. — Robert Hicken
@Robert Hicken - the images is inverted (upside down) when it hits the CCD detector which is why the image is why the bottom edge (ground) would be dark (just like a film camera) if the upper edge is dark then that would be the CCD sensor having some damage or something is sitting on top of it blocking the light from reaching it. — Dan

Nikon D5100

Half the Picture is Black

Update (06/06/2022)

1 Antwoord

Voeg je antwoord toe