Ga door naar hoofdinhoud

Released September 20, Apple's flagship 2019 smartphone features a 5.8" OLED display, a triple-lens rear camera, and greatly improved battery life. Successor to the iPhone XS.

156 Vragen Bekijk alle

I’m ready to throw this phone across the room!

Replacing screen.

I’m on my second screen.

Everything is connected.

# Phone turns on, I can hear and feel the vibrations.

  1. Screen is responding to my touch.
  2. Screen is black, I cannot see anything of the screen and/or a very dimly Apple logo upon start up.
Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
1 Opmerking

I’m so frustrated!! I don’t know what to do

door

Voeg een opmerking toe

3 Antwoorden

Het nuttigste antwoord

This is the symptom of a faulty ambient light sensor. It might have got damaged during the screen replacement.

Was dit antwoord nuttig?

Score 2
Voeg een opmerking toe

hello David,

it seems to be like faulty new screen panel, it happens sometimes. But, most cases (you nothing write about a reason of change) its just a badly inserted screen connector into the port. Don't forget about first important electronic rule - battery firs when unplugging and the last when pluging.

It would be a good practice to go to a nearby repair shop and have your screen checked. It shouldn't cost a lot, just plug it in and check on another phone if it's not working. If, however, we'll wonder later.

Was dit antwoord nuttig?

Score 0

2 opmerkingen:

Thanks for the reply... I have two screens .. the first didn’t work, so I bought another.. do you think I could have damaged one of the prongs? Causing no light? Idk? It’s sitting away from me right now, as jt is so frustrating

door

it's hard to answer your question without touching the phone. The 11pro model has an OLED screen, so different rules apply here than in the LDC models. If the OLED screen does not work, if it is not damaged, it has a problem with the power supply. All the more, give the phone to a good repair shop, even for diagnostics. You will learn everything - you need to measure the ports with the current, check the screen. You may find that you now have two :-) working screens :-). Fingers crossed.

door

Voeg een opmerking toe

I'd second popping into a shop and see if they can test another screen for you.

You could try a soft reboot.

Or even dfu mode restore.

Sometimes, the aftermarket screens have ever so slightly bigger fpc connectors, and these can stretch out the board connectors, but this is rare.

Is It an oled or LCD replacement?

Was dit antwoord nuttig?

Score 0

1 Opmerking:

it is an oled screen

door

Voeg een opmerking toe

Voeg je antwoord toe

David Johnson zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 13

Altijd: 135