Repareer je spullen Gemeenschap Winkel

Apple's 2016 revision to their laptop lineup targeted at professional users. Features a 15-inch, 2880-by-1800 Retina display, quad-core Intel Core i7, 256 GB / 512 GB /1 TB / 2TB storage options, 16 GB RAM, and a keyboard equipped with a Touch Bar. Released November 2016. Features Model A1707.

260 Vragen Bekijk alle

Opties

MacBook Pro startup chime (5 times), no Apple logo

Hi all,


I was just in the progress of backing up all my data of my “old” MacBook Pro 15” 2016 with touchbar. That progress finished. When I came back to the MacBook Pro, it was shut off, so I tried to turn it on again.

However, now I hear the chime when booting and after a “full” chime, it sort of echo’s 5 chimes after that on low volume. When plugged in the charger, it keeps trying to boot. You’ll hear one semi-loud full chime, and them 5 small chimes. No Apple Logo, no backlight, nothing.

Tried resetting the NVRAM, SMC and everything I could find, but it just keeps trying to boot up. Screen doesn’t show anything, tried to connect it to a monitor, but still the same. It looks like something in the boot process fails or hangs.

Any suggestions?

Thanks in advance!

Update: Added video

https://youtu.be/r_rsLTQOXqc

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste

Opties

What happens when you hold option during start up? does it show the boot disks or just shut down? It might be a failed update that didn’t install properly. Ive seen many of these model MacBooks with stuck on Apple logo being caused by a failed update or OS upgrade. It is usually caused by the computer loosing power or WiFi connectivity during an update. If you hold option during boot up and see multiple disks like Macintosh HD and another disk called macOS Installer or macOS Update then that was the issue. Sometimes if you choose to boot into the installer disk it will fixi itself if you leave it alone for a while and make sure you are somewhere where you will automatically connect to wifi. Hope this helps!

Was dit antwoord nuttig?

Ja Nee
Score 0

1 Opmerking:

Tried that, but still the same. I've added a video in the post. Tried the Power + T and connecting it to another Mac, but the MacBook doesn't seem to listen to any keyboard input. It looks like the bootloader fails or something.

I haven't initiated an update by the way. I haven't updated it to macOS 12, because I was about to wipe it. But before I could do any of that, this happened. I didn't start the process of formatting the SSD yet, to be clear.

Thanks for looking into it though!

door

Voeg een opmerking toe

Voeg je antwoord toe

Bart Versluijs zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 1

Altijd: 118