Repareer je spullen Gemeenschap Winkel

The Wi-Fi only version of Apple's iPad 6, released in March 2018. Available with 32 and 128 GB storage options. Features a 9.7" Retina display and 64-bit A10 fusion chip.

151 Vragen Bekijk alle

Opties

Replaced the digitizer and there is a strip that is not responding

Hi all,

Having issues working out why one digitizer has a strip near the bottom that does not work after been replaced. started a draw program and all along the screen there is a strip that does not work.

The ebay seller said the screen was fully tested before shipped.

I bought 2 from the seller and the other screen does work (although i did manage to break the home button cable :D

Block Image

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste

Opties

The part is defective, sometimes defects take a while to present themselves or damage occurs during shipping or the part was never actually tested, you never really know which one is the case. The home button can be replaced fairly easily, although the home buttons on iPads are a lot trickier to get set properly compared to iPhones.

Was dit antwoord nuttig?

Ja Nee
Score 0

1 Opmerking:

I took the iPad up to a repair shop up the the street. he looked at the connectors on the ipad and on the replacement screen and said there was nothing wrong with them.

Is it correct to assume that the film on the back and front of the replacement digitizer can stay while you test it? should not affect this i hope?

door

Voeg een opmerking toe

Voeg je antwoord toe

Ronnie Jorgensen zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 8

Altijd: 32