Ga door naar hoofdinhoud

The G502 Hero has the same ergonomic design as its predecessor, with an updated sensor. Released in 2018 and identified by model number M-U0047.

11 Vragen Bekijk alle

Scroll button for the Logitech G502 Hero is not clicking


if the scroll button for the Logitech G502 Hero is not clicking so where’s the problem then and can i fix it ? (i mean the main click not the right and left scroll click) thanks in advance :)

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
Voeg een opmerking toe

6 Antwoorden

Het nuttigste antwoord

The scroll wheel can be locked (clicky) and unlocked (freewheeling). Simply press the small square button just behind the wheel itself (marked with a pair of arrows in a circle) to switch between the two modes. Note that the button has needs to be pressed fairly firmly untill it clicks.

Was dit antwoord nuttig?

Score 5

3 opmerkingen:

That's not what he meant

door

Fixed it for me!

door

fixed for me! Thanks!

door

Voeg een opmerking toe

Hi,
you might want to check out the disassembly and see if the scroll wheel assembly is clean and functioning. Proceed to step 9 for a “preview” how it looks on the inside:
Logitech G502 Hero Disassembly
In step 10 you can see the scroll click button between the two springs.

Was dit antwoord nuttig?

Score 3

2 opmerkingen:

Hi! I just ran into the same problem OP was having with this device and upon further inspection, the area where the middle mouse button is pressed down seems to have a dent. The click in the mouse works about 1/4 of the time and there is no firm clicking like before. This damage occurred within the 30 minutes that I left school and made it home. The bag was not treated violently and the mouse has been used normally. Any assistance would be great. Thanks!

door

Wow Perfect Thank you

door

Voeg een opmerking toe

The click is likely permanently broken as the switch is just a little plate that probably got dented. It does not look easy to desolder but it might be possible. You can also just remap middle click to another button like one of the ones to the left of left click, personally prefer that over middle click now and the switch will last a lot longer

Was dit antwoord nuttig?

Score 1

1 Opmerking:

Yes. This was the problem. I had to purchase a new mouse.

door

Voeg een opmerking toe

When the same thing happened to me, I just went into GHUB and then changed the mapping of my buttons, removing middle mouse click from the scroll wheel and then setting the button behind the wheel toggle switch (the one that's normally mapped to be the onboard profile switcher, the I lock my key assignments so that it will remain the same for all of my games and applications

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

I had a similar issue with my mouse when it suddenly stop working. In my case it was not due to any hardware issue but moisture and dirt. Blow through strong air using any air pressure pump or vacuum cleaner if it have such feature for a few minute and it will most likely be solved. If not you might need to disassemble it and clean inside out.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

clicked the button behind the mouse wheel all good

Thanks

for your comments worked well

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Ahmed AbouRayya zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 9

Afgelopen 7 dagen: 143

Afgelopen 30 dagen: 527

Altijd: 21,186