My GE microwave/ convection over wont heat up. If you start it the timer will count down but the turn table won’t move, and the system doesn’t heat up. I have already tried replacing the magnetron, and the HV cap and Diode (per a professionals suggestion) and it still dosen’t work. Any suggestions or just bite the bullet and get a new one? It’s only 6 years old.
Is dit een goede vraag?
Rep: 455,7k
11
370
1,4k
Hi @ehodeck1 ,
What is the model number of the microwave?
Have you checked the door interlock switches to make sure that they're all operatingOK?
Usually there are 2 x N.O. (normally open) and 1 x N.C. (normally closed) when the door is open.
They are a safety feature that monitors and connects power to the HV circuit (and possibly the motor circuit - depends on how the motor circuit is wired), so maybe that's why there is no heat. i.e. when a door is opened the microwave is turned off to prevent harmful radiation escaping from the oven.
Was dit antwoord nuttig?
Hi Jayeff,
I did ohm the switches out and they are working correctly. It is a PEB9159SF1SS. It is a convection / micro combo. Neither is working at the moment. I forgot to mention it had been tripping the breaker randomly for about 6 mos before it quit. Not often but maybe once every 2 weeks or so. My hunch is either the transformer of the PCBA I'm hesitant to buy one as each is rather pricey. Thanks!
Here's a link that describes how to test all the functions of a microwave so that hopefully you can determine what the problem is. (scroll to top of page to see all the tests)
The microwave's mini manual part number is GE 31-41074.
Usually these manuals have the schematics which will help to find the problem. I couldn't find a free download online but found this site but you have to join to download it. (scroll down to the download link in the post by Lighthouse)
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 4
Afgelopen 30 dagen: 26
Altijd: 1,698
