Repareer je spullen Gemeenschap Winkel

Mid 2012 model, A1278 / 2.5 GHz i5 or 2.9 GHz i7 processor.

1624 Vragen Bekijk alle

Opties

Problems after replacing hard drive

Hi all,

I recently replaced the hard drive in my MacBook with this: Crucial MX500 1 TB SSD

It worked well for the first couple days (maybe weeks? Time is blurring together these days), but now I’m running into a variety of issues. It’s been freezing fairly often - sometimes with black bars, sometimes with colorful dots in some areas of the screen, sometimes with just the screen I was on. Other times, it will crash and reboot. Sometimes it will crash and start making 3 beeps.

I’ve tried reseating/resetting all that I can and I’m at a loss. The problems don’t seem to line up with each other (from my research anyway) and I can’t figure out what do with this new hard drive. I could try switching to the old drive, but I’ve saving that as a last resort.

Have any of you encountered this situation? Any advice would be helpful. Thanks in advance!

Crucial MX500 1 TB SSD Afbeelding

Product

Crucial MX500 1 TB SSD

$62.99

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
1 Opmerking
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Het nuttigste antwoord

Opties

1. What drive Did you put in?

2, Is it backward compatible to SATA II 3.0 Ghz?

  1. Did you replace the hard drive/IR cable
  2. MacBook Pro 13" Unibody Mid 2012 Hard Drive Cable Replacement
  3. MacBook Pro 13" Unibody (Mid 2012) Hard Drive Cable
MacBook Pro 13" Unibody (Mid 2012) Hard Drive Cable Afbeelding

Product

MacBook Pro 13" Unibody (Mid 2012) Hard Drive Cable

$34.99

Was dit antwoord nuttig?

Ja Nee
Score 3

4 opmerkingen:

Crucial MX500 1 TB SSD

This is the drive I used. I didn't replace the cable, but will do so next. Thank you!

door

That drive is comparable and should work.

door

@nfezz - Every time its the cable! Fixes them 99% of the time. It should honestly be considered a preventative repair on these 2012 machines.

door

Hi all. I replaced the hard drive cable and I’m still running into the same issues. Any other ideas before I try switching back to the old hard drive?

door

Voeg een opmerking toe

Voeg je antwoord toe

nick felezzola zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 59