Ga door naar hoofdinhoud

The Galaxy Watch Active2 is a smartwatch from Samsung Electronics. Its model number is SM-R825, SM-R830, or SM-R835 and was released in August 2019. Repair your Samsung Galaxy Watch Active2 with these guides.

45 Vragen Bekijk alle

My touch screen doesn't seem to be working on my Samsung Active2 watch

The screen on my watch doesn’t seem to be working. I can’t get into any of the widgets. It doesn’t seem to be “feeling” my taps. Is this repairable?

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 9
Voeg een opmerking toe

4 Antwoorden

Het nuttigste antwoord

Along with this issue a few users are facing issue with their watch that it keeps responding without any touch. So, here are a few methods to fix the watch facing Ghost Touch issue.

Was dit antwoord nuttig?

Score 1

2 opmerkingen:

Actually from the searching around I did. I found out that repeated sloppy water exposure were the common tigger for ghost touch. The glue on the active 2 isn’t the best, some watch even open by themselves because of heat and normal use. Soppy water seems to more easy get to and damage the screen digitizer. If you wear a case over the watch it kill it faster because the humidity is getting trap and end up going insides the watch.

door

Can this be fixed? I noticed it started after high humidity and having a screen protector over it

door

Voeg een opmerking toe

Hi gary & chris,

you might want to check if the display connector sits properly on the motherboard or see if there is any dirt or remnants of water inside the watch which may affect the touch function of the display.

See this back cover guide to get inside. The top connector in the last image is the display.


Also you can read this thread (Samsung forum) on water damage on Galaxy watches for more background information.

If still under warranty from Samsung you may be eligible for a replacement or repair.

Samsung Galaxy Watch Active2 Vervanging van de achterste behuizing

Was dit antwoord nuttig?

Score 0

1 Opmerking:

Bought a decent Y00 as didnt have one, but %#*@ screws were in so tight i ended stripping the heads trying to get them out.

door

Voeg een opmerking toe

Software update...us

But not working my whatch

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

From the « research » I did (basically I read through a lot of other people that the issue wasn’t fixable by software). I found out that repeated sloppy water exposure were the common tigger for ghost touch. The glue on the active 2 isn’t the best, some watch even open by themselves because of heat and normal use. Soppy water seems to more easy get to and damage the screen digitizer. If you wear a case over the watch it kill it faster because the humidity is getting trap and end up going insides the watch

Was dit antwoord nuttig?

Score 0

1 Opmerking:

I think you are also right men

door

Voeg een opmerking toe

Voeg je antwoord toe

gary & chris vance zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 5

Afgelopen 7 dagen: 48

Afgelopen 30 dagen: 263

Altijd: 16,995